Contact Us Now
Talk to our team to book your move
This is the situation that almost every one of us reading this blog has faced at least once in our lives. Relating to it is not going to be difficult at all. You have that singular fear that you might never see your deposit money again. Your landlord has your bond cash and he may not let it go until he has seen and examined every tiny corner of the property that you have resided in for so long. What does that mean?
It means that the day you decide to move out of your property, you should also decide to choose the correct course of action to clean it nicely so that you can easily get your bond money back. This is called bond back cleaning and it is extremely essential that you do it right. The following section talks about a few very practical and result-oriented tips that are going to solve this little problem for you. Let’s begin:
The very first thing that you need to do is get ahold of your condition report. This is a very critical step that you have to perform right in the beginning when you move into the property. There is only one purpose of this condition report which is of utmost importance to you and that is to help you assess any damage to the house, room by room so that you can compare it with the initial state of the property. This includes all the fixtures, fittings, pieces of furniture that came with the house, and other components that you have used for the duration of your residence on this property. A good look at these pictures and the condition report in totality will give you a better perspective of the changes that have occurred over time. It guides you with the repairs, replacements, cleaning procedures, and other fixes that you might have to make to the property to get your bond money back.
The next thing to do is to prepare a checklist. Every tenant with even an ounce of sense would readily work on creating one. A few of the areas that you should include on your cleaning checklist are:
It is better to create a checklist in order of priority and the amount of debris that they have gathered over the years. So basically, you cannot ignore any area of the house because your landlord is going to check for even the tiniest of problems in all these segments of the property.
One very useful tip that you should always remember when performing a bond cleaning all by yourself or even with the help of a professional in Melbourne, is to move from top to low. So, this means that you will start with your ceilings, ceiling fans, lights, window borders, shelves, and other surfaces and gradually move lower to your furniture pieces, carpets, and then finally to your floor. This is because the debris, dirt, and dust are going to fall on the ground eventually. It is never advised to start cleaning from the ground up.
Remember to wipe down all your ceiling fans, light fixtures, chandeliers, and lampshades. The next are your racks, showcases, shelves, and also other fixtures that are located above your head level. Do not forget to clean your wall art and also any showpieces that came with the house. You can remove all the handprints and oil spots using a mild sugar soap solution. Remember that all the appliances located in your living room, dining area, bedroom, and also your kitchen should be cleaned with a microfiber cloth and nothing that leaves any spots or scratches behind.
Talking about your kitchen, this is the place where you should go next. It has a lot of problem areas such as your:
These are going to give you a lot of trouble. Make sure to use a solution of vinegar and water for the surfaces that are white in color and too hard to clean. For your backsplashes, you can always use a microfiber cloth and a bit of sugar soap solution. To get rid of the stubborn limescale, you can always use a bit of table salt with a squeezed lemon peel.
Your bathrooms and many of its fittings are also going to need special attention. Ask your bond cleaning service professionals to start with your lights, fans, and exhaust grills first. The next will be your mirrors, cabinets, shelves, and other storage compartments located above your eye level. You can then ask them to move to your backsplashes and countertops later. A few areas in your bathroom that you can never ignore are your:
A lot of homeowners in Melbourne forget that bond back cleaning is also about maintaining the aesthetics and cleanliness of their exterior. These have a lot of areas that will be very difficult to reach. Exterior cleaning is usually ignored because it is just too challenging to carry out. You will have to make sure that your gardens are well kept. Trim down the trees that have grown too much in length. All the external surfaces, railings, windows, gutters, and balconies should also be cleaned before you leave the house for good.
Your windows are one of those areas that gather a lot of dirt and grime. You should use a microfiber cloth and a very mild cleaning solution to get rid of fingerprint stains and other stubborn spots. It is always better to keep a bottle of polish handy if the need arises. The crevices and corners of your windows can be especially tricky to clean. This is why it is advised to use a soft-bristled toothbrush to get rid of the dust that gets accumulated in between those edges.
If you decide to go with a bond cleaning service in Melbourne, do remember that the pricing is not everything. Get in touch with at least 4 or 5 end of lease cleaning professionals in the city and compare their offers before you pick one. Remember to check their reviews and testimonials as well because they will give you a clearer picture of whether you should choose them for your house or not. Happy moving!
Talk to our team to book your move